Clean Ream Extreme Brochure

Clean Ream Extreme Instructions

Reed Manufacturing Clean Ream Extreme, Plastic Pipe Fitting Reamer

Money-saving plastic pipe reamers (also known as socket savers and/or hub savers) are designed to clean out the old or broken pipe and leftover solvent cement from a fitting so the fitting can be reused. In this era of green living and recycling, try these reamers on PVC, CPVC or ABS to save time and material costs. Plastic Pipe Fitting Reamers fit into standard ½” drills. PPR socket savers work great for vent lines, drain lines, PVC unions and water lines. Carbide cutting insert on socket saver provides a cutting edge on each side. Rotate the socket saver's cutting insert before replacement and receive three additional cutting edges.

NOTE: Clean Ream Extreme Plastic Pipe Fitting Reamers are NOT recommended for high pressure supply systems or for vent side of gas burning appliance piping systems.

Features

Simply cut the pipe as close as possible to the fitting, insert the reamer into the pipe, and drill out the old pipe and cement residue.
Clean leftover pipe and solvent cement residue from Sch. 40 PVC, CPVC or ABS fittings.
Reduce labor time and materials costs by reusing the fittings.
Fits into standard 1/2 inch drill.
Pilot diameter aids in cutting on center and stops tool at the proper cutting depth.
Clean edge of PPR with solvent to remove the thin film left by solvent cement.
Use high torque, low RPM drill setting to reduce heat caused by friction and to provide the cleanest ream.
3/8" Shaft size

Models

PPR150 / 04524: 1-1/2"
PPR200 / 04525: 2"
PPR300 / 04526: 3"
PPR400 / 04527: 4"

Related Video: Reed Manufacturing Clean Ream Extreme

^{TOZ1900400 TOZ1900405 TOZ1900415 TOZ1900410}

Collection: All

Filter products

Brand

Type

Price

Reed Manufacturing Clean Ream Extreme, Plastic Pipe Fitting Reamer