Oatey 40610 - Hercules Plumber's Silicone Grease - 2 oz

Hercules Plumbers Silicone Grease is a superior product that lubricates and prevents corrosion on valve stems, faucets, ballcock linkages, and other places where waterproof grease is needed. When applied to rubber and synthetic O-rings, insures free movement and extended service life of faucets. Plumbers Silicone Grease can also be used on sump and sewage ejector pump linkage to prevent corrosion and sticking.

Will not melt like ordinary grease and can be applied to both steam and hot/ cold water systems, withstanding exposure from -40 to +400 degrees F. Waterproof and heat resistant, Plumbers Silicone Grease will remain intact and not break down or disperse into water stream. Resists wash out even in severe water flow or water wash situations. Safe for use with potable water.

Hercules Plumbers Silicone Grease contains no petroleum products and can be used on plastic and rubber components. A smooth, VOC-free translucent gel maintains consistency under high temp exposure.

Features

When applied to rubber and synthetic O-rings, insures free movement and extended service life of faucets
Can also be used on sump and sewage ejector pump linkages to prevent corrosion and sticking
Will not melt like ordinary grease can
Contains no petroleum products
Can be used on plastic and rubber components
Non-hazardous and odor free
Color: Clear
Size: 2 Oz
Max Use Temperature: 400 degrees F
Weight: 0.2 lbs
California VOC Compliant: Yes
Specific Uses: When applied to rubber and synthetic O-rings, insures free movement and extended service life of faucets. Plumbers Silicone Grease can also be used on sump and sewage ejector pump linkage to prevent corrosion and sticking.
Specific Applications: Plumbers Silicone Grease can be used as a lubricant on sliding or rotating metal parts in steam and hot/cold water systems for valve stems, faucets, O-rings and ballcock assemblies.

Directions for Use

Valve Bodies: Unscrew valve bonnet nut. Rotate valve stem counter clockwise to remove from valve body. Clean stem and threads if necessary. Apply a liberal amount of Silicone Plumbers Grease to the stem and stem threads. Reassemble in reverse order. Tighten bonnet nut lightly. Retighten if necessary to prevent seepage when system pressure is restored.
Ballcock and Float Linkages: Clean and descale first if necessary. Apply liberally to all rubbing and pivoting surfaces. Apply a thin film to all metal parts in contact with water to prevent corrosion and scale build up. Apply to float linkage threads to prevent corrosion.

PCZ1125107

Chemicals & Compounds