Installation Instructions

Specification Sheet

TrimLineSeries Zinc-Plated Steel ADA Surface-Mounted Automatic Hand Dryer, White Epoxy Finish, 115V

Features:

Unit shall be equipped with uniquely designed (patent pending) dual air outlets that provide a swirling circulation of airflow for (less then 25 seconds) hand dry
Motor shall be 1/7 hp, universal type on resilient mounting with sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at nondrive end
Electronic sensor shall automatically turn dryer on when hands are held under air-outlet opening and across path of sensor
Dryer shall turn off automatically when hands are removed
Unit shall be protected by a limited 10 -year warranty on all parts except motor brushes

Materials:

Cover — 22-gauge galvanized steel with exposed surface type-304 stainless steel with #4 satin-finish vertical grain (B-7128) or 22-gauge mild steel zinc plated with high-gloss white epoxy paint finish (B-7120) covers with UL 94-5VA black plastic trim and side panels.
Cover equipped with uniquely designed dual air outlets.
Air-inlet is equipped with vandal-resistant grille.
Cover projects no more than 4" (100mm) from wall and is secured to mounting base with two vandal-resistant, recessed hex screws.
Mounting Base — 20-gauge (1.5mm) plated steel with four 0.236'' (6mm) diameter mounting holes.
Motor — Universal, 1/7 hp, 8000 rpm, on resilient mounting. Sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at nondrive end. Equipped with automatic thermal-overload switch.
Fans — Two balanced, double-inlet centrifugal fans are mounted on motor shaft; directs airflow over heating element at 71 cfm.
Heating Element — Two coiled nickel-chrome heating elements are mounted in mica frame and protected by automatic thermal-overload switches. Heating elements, heat air without hot spots — inaccessible to vandals.
Electronic Control — Infrared sensor automatically turns dryer on when hands are held under air-outlet opening and across path of sensor. Remove hands from path of sensor and dryer stops. Electronic sensor has automatic shutoff approximately 1-1/2 minutes after dryer turns on if an inanimate object is placed across air-outlet opening. After inanimate object is removed, electronic sensor automatically resets itself and dryer operates normally.

Operation:

No-touch operation: electronic sensor automatically turns dryer on when hands are held under air-outlet opening and across path of sensor. Dual air outlets provide a swirling circulation of airflow for comfortable hand drying.
Drying time less than 25 seconds.
Remove hands from path of sensor and dryer stops.
Dryer operates only when actually drying hands, which saves energy and operating costs.
Electronic sensor will automatically shut dryer off 1-1/2 minutes after dryer turns on if an inanimate object, such as tape or chewing gum, is placed across air-outlet opening.
After inanimate object is removed, electronic sensor automatically resets itself and dryer operates normally

Collection: $850 to $900

Filter products

Type

Price

Collection

Bobrick 7120 115V - QietDry TrimDry ADA Surface Mounted Hand Dryer