1-1/2" Diameter Two-Wall Tub/Shower Toilet Grab Bar, Stainless Steel

About the Bobrick B68137 Stainless Steel 18 Gauge TwoWall Grab Bar with Concealed Mounting and Snap Flange The Bobrick B68137 Stainless Steel 18 Gauge TwoWall Grab Bar with Concealed Mounting and Snap Flange acts as a balancing support and a safety backup fixture to help prevent dangerous bathroom falls. Made of sturdy 18 gauge stainless steel tubing, the Bobrick B68137 Stainless Steel 18 Gauge TwoWall Grab Bar with Concealed Mounting and Snap Flange provides a secure handrail where you need it. The bar extends across two perpendicular walls for increased support in a single welded structural unit. The patented fixture can support upwards of 900 pounds when installed properly and when fixed to strong anchoring walls. The Bobrick B68137 Stainless Steel 18 Gauge TwoWall Grab Bar with Concealed Mounting and Snap Flange complies with ADA Accessibility Guidelines and is excellent for use in schools, businesses, commercial buildings, hotels, medical buildings, restaurants or more.Barrier Free Guidelines: Diameter of grab bars should be 11/4" to 11/2" (3238mm) with 11/2" (38mm) clearance from the wall, and should not rotate in their fittings. Required mounting height is universally 33" to 36" (840915mm) from the centerline of the grab bar to the finish floor. Structural strength of all grab bars and their mounting devices should withstand more than 250 pounds of force (1112 N). For all barrierfree toilet compartments, individual toilet rooms and guest bathrooms, it is recommended that a 36" (915mm) min. horizontal grab bar be installed on the back wall over the toilet and a 42" (1065mm) min. horizontal grab bar be installed on the side wall or partition nearest the toilet. This can also be accomplished with a single horizontal twowall grab bar.