{"title":"BrassCraft","description":"","products":[{"product_id":"brasscraft-cr1901dvsx-c-1-2-nom-comp-x-3-8-o-d-comp-x-3-8-o-d-comp","title":"CR1901DVX C - 1\/2\" Nom Comp x 3\/8\" O.D. Comp x 3\/8\" O.D. Comp","description":"\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=e27c05eb-1e07-426b-b31d-22c429571ddc\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=ff631a8d-5e56-49f7-8bd6-9fcf40ab5d0e\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eBrassCraft Water Supplies Catalog\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=abf13012-e07f-4461-bce7-3fafc991a8d6\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eCR1900\/1901DVX Submittal Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eBrassCraft 1\/2 in. Nom Compression Inlet x 3\/8 in. OD Compression x 3\/8 in. OD Compression Dual Outlet, Dual Shut-Off Multi-Turn Angle Valve controls water flow to household plumbing fixtures. The angle valve is most often used where the water pipe enters the room from the wall. The dual outlet allows two independent supply lines to be attached to a single valve. The dual shut-off allows you to turn off the water to one source while working on another. Ideal for adding dishwashers, ice makers, water filters and instant hot water dispensers to existing water supply. With a few turns of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eForged one-piece brass body provides strength,durability,and long-lasting performance\u003c\/li\u003e\n\u003cli\u003e1\/2 in. Nom Comp Inlet x 3\/8 in. OD Comp x 3\/8 in. OD Comp\u003c\/li\u003e\n\u003cli\u003eCompatible with copper pipe\u003c\/li\u003e\n\u003cli\u003eFor use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115° F. For those applications, use our KT™ series ball stops.\u003c\/li\u003e\n\u003cli\u003eMulti-turn operation means water flow control with only a few turns of the handle\u003c\/li\u003e\n\u003cli\u003eEasy-to-remove handle protects against accidental operation during rough-ins\u003c\/li\u003e\n\u003cli\u003eForged one-piece brass body provides strength,durability,and long-lasting performance\u003c\/li\u003e\n\u003cli\u003eBrass finish\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating: 40° to 160°F\u003c\/li\u003e\n\u003cli\u003ePressure rating: 125 psi maximum\u003c\/li\u003e\n\u003cli\u003eNo-lead certified\u003c\/li\u003e\n\u003cli\u003eDesigned, machined and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/kNaVBHn1vGo\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cspan style=\"color: #999999;\"\u003ePTZCA10009\u003c\/span\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":42096870031605,"sku":"CR1901DVX C","price":53.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/products\/cr1901dvx_c_std.jpg?v=1755627853"},{"product_id":"brasscraft-b1-20kc-f-3-8-comp-x-3-8-comp-braided-hose-faucet-connector-20-length","title":"B1-20KC-F  - Braided Faucet Connector - 3\/8\" Comp x Comp, 20\"","description":"\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=5f7dedfb-9da4-499a-93e7-8116b51dab0c\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e \u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eBrassCraft Speedi Plumb Brochure\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eBrassCraft Speedi Plumb PLUS 3\/8 in. Compression inlet x 3\/8 in. O.D. Compression outlet with Nut and Brass Sleeve flexible braided polymer water connector is corrosion resistant inside and out. Used to connect the water supply to a faucet with pigtail connections (copper tube), this connector features a high tenacity, multi-filament yarn, protected by a special polymer coating for optimum corrosion resistance and durability. On the inside, our tough PVC tubing resists attack by chlorine, chloramines and other corrosive elements. The braided polymer fibers are designed to bend freely without kinking or crimping.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBraided polymer tube\u003c\/li\u003e\n\u003cli\u003e3\/8 in. Comp x 3\/8 in. Comp\u003c\/li\u003e\n\u003cli\u003eConnects to faucet with 3\/8 in. compression connection\u003c\/li\u003e\n\u003cli\u003eFor use in potable water distribution systems in accessible locations only\u003c\/li\u003e\n\u003cli\u003eTough polymer-coated fibers enhance corrosion resistance\u003c\/li\u003e\n\u003cli\u003eExternal corrosion resistance to most common household, tile and glass cleaners\u003c\/li\u003e\n\u003cli\u003eInternal corrosion resistance to harsh water conditions\u003c\/li\u003e\n\u003cli\u003eSilver\/gray finish\u003c\/li\u003e\n\u003cli\u003ePlated brass nuts for long lasting performance\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating: 40° to 160° F, intermittent to 180° F\u003c\/li\u003e\n\u003cli\u003ePressure rating: 125 PSI maximum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cspan style=\"color: #999999;\"\u003ePTZ1210076\u003c\/span\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":42283717263605,"sku":"B1-20KC F","price":9.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/products\/b1-16kc_f_bty.jpg?v=1755627847"},{"product_id":"brasscraft-wb034-18n-3-4-fip-x-3-4-nom-male-female-sweat-x-18-7-8-od-copper-water-heater-connector","title":"WB034-18N - Copper Water Heater Connector - 3\/4\" FIP x Sweat, 18\"","description":"\u003cp\u003e\u003cstrong\u003eBrassCraft WB034-18N - 3\/4\" FIP x 3\/4\" Male \/ Female Sweat 18\" Water Heater Connector\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBrassCraft Copper-Flex 3\/4 in. Female Iron Pipe inlet x 3\/4 in. Nominal Female\/Male Sweat outlet water heater connectors. Used to connect the water supply to your water heater, this connector features an integrated dielectric sleeve, the sleeve isolates dissimilar metals within the waterway, where galvanic and electrolytic corrosion have their greatest potential. This separation provides complete protection against galvanic corrosion that can deteriorate the connector and cause leaks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCorrugated copper tube\u003c\/li\u003e\n\u003cli\u003e3\/4 in. FIP x 3\/4 in. Nom Female\/Male Sweat (7\/8 in. I.D.)\u003c\/li\u003e\n\u003cli\u003eUse with electric or gas water heaters or softeners. Use only to connect water\u003c\/li\u003e\n\u003cli\u003eFor use in exposed locations only to connect water heaters and other water connected devices to the water supply\u003c\/li\u003e\n\u003cli\u003eNo dielectric union needed, the integrated dielectric sleeve eliminates the need to install an additional dielectric union, reducing time and installation costs\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating: 40° to 140° F, intermittent to 180° F\u003c\/li\u003e\n\u003cli\u003ePressure Rating: water pressures up to 125 PSI maximum\u003c\/li\u003e\n\u003cli\u003eDesigned, machined and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e  \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003csup\u003e\u003cspan style=\"color: #999999;\"\u003ePXZ1143635\u003c\/span\u003e\u003c\/sup\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":42284721602805,"sku":"WB034-18N","price":16.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/e81c6614-b59a-4760-8ec9-8762cf3b5507.jpg?v=1755627845"},{"product_id":"brasscraft-cssc4k-18-18-procoat-1-2-mip-x-1-2-fip-gas-connector-with-ball-valve","title":"CSSC4K-18 - ProCoat Stainless Steel Gas Connector with Ball Valve - 1\/2\" MIP x FIP, 1\/2\" ID, 18\"","description":"\u003cp\u003e\u003cstrong\u003eBrassCraft CSSC4K-18 - 18\" ProCoat 1\/2\" MIP x 1\/2\" FIP Gas Connector with Ball Valve\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBrassCraft’s ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.\u003cbr\u003e*Gas connectors may not be permitted for all uses in all locations. Consult with a professional installation expert or a plumber to ensure compliance with all applicable codes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCorrugated stainless steel with corrosion resistant coating\u003c\/li\u003e\n\u003cli\u003eIncludes: 1\/2 in. MIP steel fitting and 1\/2 in. FIP inlet brass gas ball valve\u003c\/li\u003e\n\u003cli\u003eIdeal for large demand appliances such as 5-burner gas ranges, furnaces and smaller BTU residential tankless water heaters\u003c\/li\u003e\n\u003cli\u003eUse with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures\u003c\/li\u003e\n\u003cli\u003eYellow coating\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating: -40°F to 150°F\u003c\/li\u003e\n\u003cli\u003ePressure rating: 1\/2 psi maximum\u003c\/li\u003e\n\u003cli\u003eDesigned, machined and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Video: How to Install a BrassCraft Gas Appliance Connector\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Er_G9YXsT4c\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003csup\u003e\u003cspan style=\"color: #999999;\"\u003ePXZ1040364\u003c\/span\u003e\u003c\/sup\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":42656455229685,"sku":"CSSC4K-18","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/brasscraft_cssc4k-18_1_wm.jpg?v=1755627809"},{"product_id":"cssb21-24-gas-range-gas-furnace-flex-line-7-8-od-x-24-3-4-fip-x-3-4-mip-up-to-290-900-btu","title":"CSSB21-24 - ProCoat Stainless Steel Gas Connector - 3\/4\" FIP x MIP (1\/2\" FIP Tap), 3\/4\" ID, 24\"","description":"\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=62537021-0c1f-4ab8-87a5-0f3c67141e83\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eSubmittal Form\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCSSB21-24 - 3\/4\" FIP x 3\/4\" MIP (1\/2\" FIP Tap) ProCoat Gas Appliance Connector - 24\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.\u003cbr\u003e*Gas connectors may not be permitted for all uses in all locations. Consult with a professional installation expert or a plumber to ensure compliance with all applicable codes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCorrugated stainless steel with corrosion resistant coating\u003c\/li\u003e\n\u003cli\u003eFittings included: 3\/4\" FIP and 3\/4\" MIP (tapped 1\/2\" FIP)\u003c\/li\u003e\n\u003cli\u003eIdeal for large demand appliance such as tankless water heaters, furnaces and professional-grade gas appliances\u003c\/li\u003e\n\u003cli\u003eUse with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures\u003c\/li\u003e\n\u003cli\u003eEasy-to-remove handle protects against accidental operation during rough-ins\u003c\/li\u003e\n\u003cli\u003eYellow coating\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating:-40° -150° F\u003c\/li\u003e\n\u003cli\u003ePressure rating: 1\/2 psi maximum\u003c\/li\u003e\n\u003cli\u003eDesigned, machined and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Video: How to Install a BrassCraft Gas Appliance Connector\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Er_G9YXsT4c\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cspan style=\"color: #999999;\"\u003ePXZ1040495\u003c\/span\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":43589305729269,"sku":"CSSB21-24","price":34.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/products\/cssb21-24_1.jpg?v=1755627612"},{"product_id":"cssc4k-36-procoat-1-2-mip-x-1-2-fip-ball-valve-x-36-stainless-steel-gas-connector-5-8-o-d-125","title":"CSSC4K-36 - ProCoat Stainless Steel Gas Connector with Ball Valve - 1\/2\" MIP x FIP, 1\/2\" ID, 36\"","description":"\u003cp\u003e\u003cstrong\u003eCSSC4K-36 - 1\/2\" MIP x 1\/2\" FIP ProCoat Gas Connectors with Ball Valve\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.\u003cbr\u003e*Gas connectors may not be permitted for all uses in all locations. Consult with a professional installation expert or a plumber to ensure compliance with all applicable codes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCorrugated stainless steel with corrosion resistant coating\u003c\/li\u003e\n\u003cli\u003eIncludes: 1\/2\" MIP steel fitting and 1\/2\" FIP inlet brass gas ball valve\u003c\/li\u003e\n\u003cli\u003eIdeal for large demand appliances such as 5-burner gas ranges, furnaces and smaller BTU residential tankless water heaters\u003c\/li\u003e\n\u003cli\u003eUse with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures\u003c\/li\u003e\n\u003cli\u003eYellow coating\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating: -40 to 150 degrees F\u003c\/li\u003e\n\u003cli\u003ePressure rating: 1\/2 psi maximum\u003c\/li\u003e\n\u003cli\u003eDesigned, machined and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003csup\u003e\u003cspan style=\"color: #999999;\"\u003ePXZ1040351\u003c\/span\u003e\u003c\/sup\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":43589305794805,"sku":"CSSC4K-36","price":26.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/brasscraft_CSSC4K-18_1_wm_95b7b23e-ba1b-4ff1-9c8d-a88583cb09c3.jpg?v=1755627611"},{"product_id":"1-2-fip-x-1-2-mip-3-8-fip-tap-procoat-stainless-steel-gas-connector","title":"CSSL54-12 - ProCoat Stainless Steel Gas Connector - 1\/2\" FIP x MIP (3\/8\" FIP Tap), 1\/4\" ID, 12\"","description":"\u003cp\u003e\u003cstrong\u003e1\/2\" FIP x 1\/2\" MIP (3\/8\" FIP Tap) ProCoat Stainless Steel Gas Connector\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBrassCraft’s ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.\u003cbr\u003e*Gas connectors may not be permitted for all uses in all locations. Consult with a professional installation expert or a plumber to ensure compliance with all applicable codes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1\/4\" I.D. (3\/8\" O.D.) corrugated stainless steel with corrosion resistant coating\u003c\/li\u003e\n\u003cli\u003eSteel fittings included: 1\/2\" FIP and 1\/2\" MIP (3\/8\" FIP)\u003c\/li\u003e\n\u003cli\u003eIdeal for low demand appliances such as dryers, decorative stoves and gas log fireplaces\u003c\/li\u003e\n\u003cli\u003eUse with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures\u003c\/li\u003e\n\u003cli\u003eProCoat coating corrosion resistant to harsh chemicals as well as UV rays and salt\u003c\/li\u003e\n\u003cli\u003eSmooth, burnished connector ends seal with less torque, making installation easier\u003c\/li\u003e\n\u003cli\u003eHigh tensile strength stainless steel is less susceptible to work hardening\u003c\/li\u003e\n\u003cli\u003eDeep corrugations enhance flexibility and maneuverability of connector during installation\u003c\/li\u003e\n\u003cli\u003eGas connector is 100% leak tested\u003c\/li\u003e\n\u003cli\u003eApproved for indoor and outdoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating: -40 to 150 degrees FPressure rating: 1\/2 psi maximum\u003c\/li\u003e\n\u003cli\u003eNot Certified\u003c\/li\u003e\n\u003cli\u003eCSA certified to ANSI Z21.24\/CSA 6.10 and ANSI Z21.75\/CSA 6.27\u003c\/li\u003e\n\u003cli\u003eDesigned, machined and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003csup\u003e\u003cspan style=\"color: #999999;\"\u003ePXZ1040290 PXZ1040295 PXZ1040300 \u003c\/span\u003e\u003c\/sup\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"12 Inches","offer_id":46488085135605,"sku":"CSSL54-12","price":11.04,"currency_code":"USD","in_stock":true},{"title":"18 Inches","offer_id":46488085168373,"sku":"CSSL54-18","price":14.55,"currency_code":"USD","in_stock":true},{"title":"36 Inches","offer_id":46574486913269,"sku":"CSSL54-36","price":17.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/products\/cssl54_1.jpg?v=1755627602"},{"product_id":"1-2-mip-x-1-2-fip-coated-gas-appliance-connector","title":"CSSD54-12  - Coated Gas Appliance Connector - 1\/2\" MIP x FIP, 3\/8\" ID, 12\"","description":"\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eCSSD54-12  - 1\/2” MIP  x 1\/2\" FIP Coated Gas Appliance Connectors\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor use with indoor and outdoor connection s of gas appliances to gas piping system. May be used with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas -air mixtures\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBrassCraft’s ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.\u003cbr\u003e*Gas connectors may not be permitted for all uses in all locations. Consult with a professional installation expert or a plumber to ensure compliance with all applicable codes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCorrugated stainless steel with corrosion resistant coating\u003c\/li\u003e\n\u003cli\u003eSteel fittings included: 1\/2\" FIP and 1\/2\" MIP (tapped 3\/8 in. FIP)\u003c\/li\u003e\n\u003cli\u003eIdeal for moderate demand appliances such as 4-burner gas ranges, cook-tops, dryers and water heaters\u003c\/li\u003e\n\u003cli\u003eUse with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures\u003c\/li\u003e\n\u003cli\u003eYellow coating\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating: -40 to 150 degrees F\u003c\/li\u003e\n\u003cli\u003ePressure rating: 1\/2 psi maximum\u003c\/li\u003e\n\u003cli\u003eDesigned, machined and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003csup\u003e\u003cspan style=\"color: #999999;\"\u003ePXZ1040305 PXZ1040315 PXZ1040325 PXZ1040345 PXZ1040355\u003c\/span\u003e\u003c\/sup\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"12 Inches","offer_id":43589309104373,"sku":"CSSD54-12","price":26.5,"currency_code":"USD","in_stock":true},{"title":"18 Inches","offer_id":43589309202677,"sku":"CSSD54-18","price":27.49,"currency_code":"USD","in_stock":true},{"title":"24 Inches","offer_id":43589309300981,"sku":"CSSD54-24","price":27.49,"currency_code":"USD","in_stock":true},{"title":"36 Inches","offer_id":43589309497589,"sku":"CSSD54-36","price":32.86,"currency_code":"USD","in_stock":true},{"title":"48 Inches","offer_id":43589309530357,"sku":"CSSD54-48","price":25.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/products\/cssd54-12_std.jpg?v=1755627599"},{"product_id":"3-4-mip-x-3-4-mip-x-18-stainless-steel-gas-connector-3-4-id","title":"CSSB11-24 - ProCoat Stainless Steel Gas Connector - 3\/4\" MIP (1\/2\" FIP Tap) x MIP (1\/2\" FIP Tap), 3\/4\" ID, 24\"","description":"\u003cp\u003e 3\/4\" MIP x 3\/4\" MIP x 18\" Stainless Steel Gas Connector 3\/4\" ID\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cspan style=\"color: #999999;\"\u003ePXZ1040496 PXZ1040471\u003c\/span\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"24 Inches","offer_id":46488084971765,"sku":"CSSB11-24","price":31.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/products\/cssb11.jpg?v=1755627598"},{"product_id":"brasscraft-male-gas-adapter-5-8-od-flare-x-1-2-mip-mau2-10-8s","title":"MAU2-10-8S - Male Gas Adapter  5\/8\" OD Flare x 1\/2\" MIP","description":"\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=eab682e6-c357-45bf-8700-a982437603e6\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eInstallation Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=aa3373a5-31d3-4dfc-a725-03037354c9d3\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eSubmittal Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBrass Craft MAU2-10-8 Male Gas Adapter\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBrassCraft’s steel female gas fitting adapts a gas connector nut to appliance gas inlet, gas ball valve outlet, or to the gas supply pipe. These fittings are manufactured from solid bar stock for a seamless, durable design. The flared end of the fitting connects to the gas connector nut. The male end connects to the gas appliance inlet, gas ball valve or gas supply stub out. Fitting is used with 5\/8 in. O.D. (15\/16-16 thread) gas connectors for appliances with larger BTU demands such as a 5 or 6 burner stove, furnace or boiler.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOne-piece solid steel body for long lasting performance\u003c\/li\u003e\n\u003cli\u003eUse in natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixture applications\u003c\/li\u003e\n\u003cli\u003eLarge wrench flats for a quick and easy installation\u003c\/li\u003e\n\u003cli\u003eTemperature rating: -40 to 150 degrees F\u003c\/li\u003e\n\u003cli\u003ePressure rating: 1\/2 psi maximum\u003c\/li\u003e\n\u003cli\u003eFor use with CSA listed ANSI Z21.24 \/ CSA 6.10 and Z21.75 \/ CSA 6.27 flexible gas connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cspan style=\"color: #999999;\"\u003ePXZ1040415\u003c\/span\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":43677492838645,"sku":"MAU2-10-8S","price":5.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/products\/mau2-10-8s_bty.jpg?v=1751910625"},{"product_id":"brasscraft-au1-8s-female-gas-union-1-2-od-flare-x-1-2-fip-steel","title":"AU1-8S - Female Gas Union 1\/2\" OD Flare X 1\/2\" FIP Steel","description":"\u003cp\u003e\u003cstrong\u003eAU1-8S - Female Gas Union 1\/2\" OD Flare X 1\/2\" FIP Steel\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003chr\u003e\u003cp style=\"text-align: right;\"\u003e\u003cspan style=\"color: #999999;\"\u003ePXZ1040379\u003c\/span\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":43677717168373,"sku":"AU1-8S","price":3.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/products\/brasscraft_au1-8s.jpg?v=1751910623"},{"product_id":"brasscraft-au2-8s-male-gas-union-1-2-od-flare-x-1-2-mip-3-8-fip-steel","title":"AU2-8S - Male Gas Union 1\/2\" OD Flare X 1\/2\" MIP (3\/8\" FIP) Steel","description":"\u003cp\u003e\u003cstrong\u003eAU2-8S - Male Gas Union 1\/2\" OD Flare X 1\/2\" MIP (3\/8\" FIP) Steel\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003chr\u003e\u003cp style=\"text-align: right;\"\u003e\u003cspan style=\"color: #999999;\"\u003ePXZ1040381\u003c\/span\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":43677717201141,"sku":"AU2-8S","price":4.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/products\/brasscraft_au2-8s.jpg?v=1751910622"},{"product_id":"brasscraft-csp-6x-compression-plug-for-3-8-od-tube","title":"CSP-6X - Compression Plug for 3\/8\" OD Tube","description":"\u003cp\u003e\u003cstrong\u003eCSP-6X - Compression Plug for 3\/8\" OD Tube\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003chr\u003e\u003cp style=\"text-align: right;\"\u003e\u003cspan style=\"color: #999999;\"\u003ePFB1427810\u003c\/span\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":43677717364981,"sku":"CSP-6X","price":3.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/products\/brasscraft_csp-6x.jpg?v=1751910622"},{"product_id":"brasscraft-cssc4k-24-1-2-mip-x-1-2-fip-procoat-stainless-steel-gas-connector-with-ball-valve-24","title":"CSSC4K-24 - ProCoat Stainless Steel Gas Connector with Ball Valve - 1\/2\" MIP x FIP, 1\/2\" ID, 24\"","description":"\u003cp\u003e\u003cstrong\u003eBrassCraft CSSC4K-24 - 1\/2\" MIP x 1\/2\" FIP ProCoat Stainless Steel Gas Connector with Ball Valve - 24\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBrassCraft’s ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.\u003cbr\u003e*Gas connectors may not be permitted for all uses in all locations. Consult with a professional installation expert or a plumber to ensure compliance with all applicable codes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCorrugated stainless steel with corrosion resistant coating\u003c\/li\u003e\n\u003cli\u003eIncludes: 1\/2 in. MIP steel fitting and 1\/2 in. FIP inlet brass gas ball valve\u003c\/li\u003e\n\u003cli\u003eIdeal for large demand appliances such as 5-burner gas ranges, furnaces and smaller BTU residential tankless water heaters\u003c\/li\u003e\n\u003cli\u003eUse with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures\u003c\/li\u003e\n\u003cli\u003eYellow coating\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating: -40°F to 150°F\u003c\/li\u003e\n\u003cli\u003ePressure rating: 1\/2 psi maximum\u003c\/li\u003e\n\u003cli\u003eDesigned, machined and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Video: How to Install a BrassCraft Gas Appliance Connector\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Er_G9YXsT4c\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003csup\u003e\u003cspan style=\"color: #999999;\"\u003ePXZ1040352\u003c\/span\u003e\u003c\/sup\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":43677717430517,"sku":"CSSC4K-24","price":19.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/brasscraft_CSSC4K-18_1_wm_221bb6fb-f0b4-46ae-a575-126fccdac3f6.jpg?v=1755627336"},{"product_id":"brasscraft-hes-6-12x-dishwasher-elbow-3-8-od-comp-x-3-4-garden-hose-with-washer","title":"HES-6-12X - Dishwasher Elbow - 3\/8\" OD Comp x 3\/4\" Garden Hose with Washer","description":"\u003cp\u003e\u003cstrong\u003eHES-6-12X - Dishwasher Elbow - 3\/8\" OD Comp x 3\/4\" Garden Hose with Washer\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003chr\u003e\u003cp style=\"text-align: right;\"\u003e\u003cspan style=\"color: #999999;\"\u003ePTZ1210300\u003c\/span\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":43677717463285,"sku":"HES-6-12X","price":6.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/products\/brasscraft_hes-6-12x.jpg?v=1751910619"},{"product_id":"brasscraft-mau2-10-12-male-gas-adapter-5-8-od-flare-x-3-4-mip-1-2-fip-tap","title":"MAU2-10-12 - Male Gas Adapter - 5\/8\" OD Flare  x 3\/4\" MIP (1\/2\" FIP Tap)","description":"\u003cp\u003e\u003cstrong\u003eMAU2-10-12 - Male Gas Adapter - 5\/8\" OD Flare  x 3\/4\" MIP (1\/2\" FIP Tap)\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003chr\u003e\u003cp style=\"text-align: right;\"\u003e\u003cspan style=\"color: #999999;\"\u003ePXZ1040377\u003c\/span\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":43677717594357,"sku":"MAU2-10-12","price":6.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/products\/brasscraft_mau2-10-12.jpg?v=1751910619"},{"product_id":"brasscraft-or17x-c-1-2-fip-x-3-8-od-comp-angle-stop","title":"OR17X C - 1\/2\" FIP x 3\/8\" OD Comp Angle Stop","description":"\u003cp\u003e\u003cstrong\u003eOR17X C - 1\/2\" FIP x 3\/8\" OD Comp Angle Stop\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003chr\u003e\u003cp style=\"text-align: right;\"\u003e\u003cspan style=\"color: #999999;\"\u003ePTZCA10018\u003c\/span\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":43677717627125,"sku":"OR17X-C","price":9.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/products\/brasscraft_or17x-c.jpg?v=1751910618"},{"product_id":"brasscraft-wb034-12n-copper-water-heater-connector-3-4-fip-x-3-4-nom-male-female-sweat-x-12","title":"WB034-12N - Copper Water Heater Connector - 3\/4\" FIP x Sweat, 12\"","description":"\u003cp\u003e\u003cstrong\u003eWB034-12N - Copper Water Heater Connector - 3\/4\" FIP x Sweat, 12\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBrassCraft Copper-Flex™ 3\/4 in. Female Iron Pipe inlet x 3\/4 in. Nominal Female\/Male Sweat outlet water heater connectors. Used to connect the water supply to your water heater, this connector features an integrated dielectric sleeve, the sleeve isolates dissimilar metals within the waterway, where galvanic and electrolytic corrosion have their greatest potential. This separation provides complete protection against galvanic corrosion that can deteriorate the connector and cause leaks.\u003c\/p\u003e\n\u003cul class=\"single-products-page__list\"\u003e\n\u003cli\u003eCorrugated copper tube\u003c\/li\u003e\n\u003cli\u003e3\/4 in. FIP x 3\/4 in. Nom Female\/Male Sweat (7\/8 in. I.D.)\u003c\/li\u003e\n\u003cli\u003eUse with electric or gas water heaters or softeners. Use only to connect water\u003c\/li\u003e\n\u003cli\u003eFor use in exposed locations only to connect water heaters and other water connected devices to the water supply\u003c\/li\u003e\n\u003cli\u003eNo dielectric union needed, the integrated dielectric sleeve eliminates the need to install an additional dielectric union, reducing time and installation costs\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating: 40° to 140° F, intermittent to 180° F\u003c\/li\u003e\n\u003cli\u003ePressure Rating: water pressures up to 125 PSI maximum\u003c\/li\u003e\n\u003cli\u003eDesigned, machined and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003csup\u003e\u003cspan style=\"color: #999999;\"\u003ePXZ1143600\u003c\/span\u003e\u003c\/sup\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":43677717692661,"sku":"WB034-12N","price":12.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/products\/brasscraft_wb034-12n.jpg?v=1755627334"},{"product_id":"brasscraft-wc44-18-copper-water-heater-connector-3-4-nom-female-sweat-x-3-4-nom-female-sweat-x-18","title":"WC44-18 - Copper Water Heater Connector - 3\/4\" Sweat x Sweat, 18\"","description":"\u003cp\u003e\u003cstrong\u003eBrassCraft WC44-18 - Copper Water Heater Connector - 3\/4\" Sweat x Sweat, 18\"\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBrassCraft Copper-Flex™ 3\/4 in. Nominal Female Sweat inlet x 3\/4 in. Nominal Female Sweat outlet water heater connectors. Used to connect the water supply to your water heater, this connector features an integrated dielectric sleeve, the sleeve isolates dissimilar metals within the waterway, where galvanic and electrolytic corrosion have their greatest potential. This separation provides complete protection against galvanic corrosion that can deteriorate the connector and cause leaks.\u003c\/p\u003e\n\u003cul class=\"single-products-page__list\"\u003e\n\u003cli\u003eCorrugated copper tube\u003c\/li\u003e\n\u003cli\u003e3\/4 in. Nom Female Sweat (7\/8 in. I.D.) x 3\/4 in. Nom Female Sweat (7\/8 in. I.D.)\u003c\/li\u003e\n\u003cli\u003eFor use in exposed locations only to connect water heaters and other water connected devices to the water supply\u003c\/li\u003e\n\u003cli\u003ePatented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion\u003c\/li\u003e\n\u003cli\u003eNo dielectric union needed, the integrated dielectric sleeve eliminates the need to install an additional dielectric union, reducing time and installation costs\u003c\/li\u003e\n\u003cli\u003eEngineered and tested for harsh water conditions\u003c\/li\u003e\n\u003cli\u003eIndoor\u003c\/li\u003e\n\u003cli\u003eTemperature rating: 40° to 140° F, intermittent to 180° F\u003c\/li\u003e\n\u003cli\u003ePressure rating: 125 PSI maximum\u003c\/li\u003e\n\u003cli\u003eNo-lead certified\u003c\/li\u003e\n\u003cli\u003eCSA and IAPMO certified\u003c\/li\u003e\n\u003cli\u003eDesigned, machined and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003csup\u003e\u003cspan style=\"color: #999999;\"\u003ePXZ1143645\u003c\/span\u003e\u003c\/sup\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":43677717758197,"sku":"WC44-18","price":27.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/products\/brasscraft_wc44-18.jpg?v=1755627333"},{"product_id":"3-4-fip-x-3-4-fip-procoat-stainless-steel-gas-connector-with-ball-valve","title":"CSSC2J-24 - ProCoat Stainless Steel Gas Connector with Ball Valve - 3\/4\" FIP x FIP, 1\/2\" ID, 24\"","description":"\u003cp\u003e\u003cstrong\u003e3\/4\" FIP x 3\/4\" FIP ProCoat Stainless Steel Gas Connector with Ball Valve\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003chr\u003e\u003cp style=\"text-align: right;\"\u003e\u003cspan style=\"color: #999999;\"\u003ePXZ1040390 PXZ1040430 PXZ1040470\u003c\/span\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"24 Inches","offer_id":46488085070069,"sku":"CSSC2J-24","price":31.31,"currency_code":"USD","in_stock":true},{"title":"36 Inches","offer_id":46488085102837,"sku":"CSSC2J-36","price":33.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/products\/brasscraft_cssc2j-12.jpg?v=1755627331"},{"product_id":"3-4-fip-x-3-4-mip-1-2-fip-tap-procoat-stainless-steel-gas-connector","title":"CSSC21-18 - ProCoat Stainless Steel Gas Connector - 3\/4\" FIP x MIP (1\/2\" FIP Tap), 1\/2\" ID, 18\"","description":"\u003cp\u003e\u003cstrong\u003e3\/4\" FIP x 3\/4\" MIP (1\/2\" FIP Tap) ProCoat Stainless Steel Gas Connector\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003chr\u003e\u003cp style=\"text-align: right;\"\u003e\u003cspan style=\"color: #999999;\"\u003ePXZ1040400 PXZ1040420 PXZ1040460\u003c\/span\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"18 Inches","offer_id":46488085004533,"sku":"CSSC21-18","price":15.12,"currency_code":"USD","in_stock":true},{"title":"24 Inches","offer_id":46767924150517,"sku":"CSSC21-24","price":17.45,"currency_code":"USD","in_stock":true},{"title":"36 Inches","offer_id":46488085037301,"sku":"CSSC21-36","price":27.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/products\/brasscraft_cssc21-18.jpg?v=1755627330"},{"product_id":"3-8-od-copper-faucet-riser","title":"1-30A C - One-Piece Copper Faucet Riser with Insert - Chrome Plated, 30\"","description":"\u003cp\u003e\u003cstrong\u003e3\/8\" OD Copper Faucet Riser\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003chr\u003e\u003cp style=\"text-align: right;\"\u003e\u003cspan style=\"color: #999999;\"\u003ePTZ1210020 PTZ1210030 PTZ1210040\u003c\/span\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"30 Inches","offer_id":46488085201141,"sku":"1-30A-C","price":17.76,"currency_code":"USD","in_stock":true},{"title":"20 Inches","offer_id":46500619747573,"sku":"1-20A-C","price":12.0,"currency_code":"USD","in_stock":false},{"title":"36 Inches","offer_id":46791814054133,"sku":"1-36A-C","price":20.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/brasscraft_cp-copper-faucet-riser.jpg?v=1751910610"},{"product_id":"b1-12kc-f-gas-union-5-8-female-flare-x-1-2-fip-steel","title":"B1-12KC-F - Braided Faucet Connector - 3\/8\" Comp x Comp, 12\"","description":"\u003cp\u003e\u003cstrong\u003eBrassCraft B1-12KC F - 3\/8\" Braided Faucet Connector - 12\" Length\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBrassCraft Speedi Plumb PLUS 3\/8 in. Compression inlet x 3\/8 in. O.D. Compression outlet with Nut and Brass Sleeve flexible braided polymer water connector is corrosion resistant inside and out. Used to connect the water supply to a faucet with pigtail connections (copper tube), this connector features a high tenacity, multi-filament yarn, protected by a special polymer coating for optimum corrosion resistance and durability. On the inside, our tough PVC tubing resists attack by chlorine, chloramines and other corrosive elements. The braided polymer fibers are designed to bend freely without kinking or crimping.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBraided polymer tube\u003c\/li\u003e\n\u003cli\u003e3\/8 in. Comp x 3\/8 in. Comp\u003c\/li\u003e\n\u003cli\u003eConnects to faucet with 3\/8 in. compression connection\u003c\/li\u003e\n\u003cli\u003eFor use in potable water distribution systems in accessible locations only\u003c\/li\u003e\n\u003cli\u003eTough polymer-coated fibers enhance corrosion resistance\u003c\/li\u003e\n\u003cli\u003eExternal corrosion resistance to most common household, tile and glass cleaners\u003c\/li\u003e\n\u003cli\u003eInternal corrosion resistance to harsh water conditions\u003c\/li\u003e\n\u003cli\u003eSilver\/gray finish\u003c\/li\u003e\n\u003cli\u003ePlated brass nuts for long lasting performance\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating: 40 to 160 degrees F, intermittent to 180 degrees F\u003c\/li\u003e\n\u003cli\u003ePressure rating: 125 PSI maximum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003csup\u003e\u003cspan style=\"color: #999999;\"\u003ePXZ1143675\u003c\/span\u003e\u003c\/sup\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":44442641006837,"sku":"B1-12KC-F","price":6.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/brasscraft_-b1-12kc-f_4.jpg?v=1755626484"},{"product_id":"1-2-mip-x-1-2-fip-ball-valve-procoat-stainless-steel-gas-connector","title":"CSSD4K-12 - ProCoat Stainless Steel Gas Connector with Ball Valve - 1\/2\" MIP x FIP (3\/8\" FIP Tap), 3\/8\" ID, 12\"","description":"\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=22224651-15c5-4916-a341-ac402e84fc16\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eSubmittal Form\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=3799727e-68d1-4896-8cfc-caa117098cef\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCSSD4K - 1\/2” MIP x 1\/2” FIP Ball Valve ProCoat Stainless Steel Gas Connector\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor use with indoor and outdoor connections of gas appliances to gas piping system. May be used with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures.\u003c\/p\u003e\n\u003cp\u003eBrassCraft’s ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.\u003cbr\u003e*Gas connectors may not be permitted for all uses in all locations. Consult with a professional installation expert or a plumber to ensure compliance with all applicable codes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCorrugated stainless steel with corrosion resistant coating\u003c\/li\u003e\n\u003cli\u003eIncludes: 1\/2\" MIP (tapped 3\/8\" FIP) steel fitting and 1\/2\" FIP inlet brass gas ball valve\u003c\/li\u003e\n\u003cli\u003eIdeal for moderate demand appliances such as 4-burner gas ranges, cook-tops, dryers and water heaters\u003c\/li\u003e\n\u003cli\u003eUse with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures\u003c\/li\u003e\n\u003cli\u003eYellow coating\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating: -40°F to 150°F\u003c\/li\u003e\n\u003cli\u003ePressure rating: 1\/2 psi maximum\u003c\/li\u003e\n\u003cli\u003eDesigned, machined and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Video: How to Install a BrassCraft Gas Appliance Connector\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Er_G9YXsT4c\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003csup\u003e\u003cspan style=\"color: #999999;\"\u003ePXZ1040310 PXZ1040320 PXZ1040330 PXZ1040340 PXZ1040350 PXZ1040360\u003c\/span\u003e\u003c\/sup\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"12 Inches","offer_id":44445942448373,"sku":"CSSD4K-12","price":18.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/cssd4k.jpg?v=1755626479"},{"product_id":"1-2-mip-x-1-2-fip-ball-valve-procoat-stainless-steel-gas-connector-1","title":"CSSD4K-18 - ProCoat Stainless Steel Gas Connector with Ball Valve - 1\/2\" MIP x FIP (3\/8\" FIP Tap), 3\/8\" ID, 18\"","description":"\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=22224651-15c5-4916-a341-ac402e84fc16\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eSubmittal Form\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=3799727e-68d1-4896-8cfc-caa117098cef\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCSSD4K - 1\/2” MIP x 1\/2” FIP Ball Valve ProCoat Stainless Steel Gas Connector\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor use with indoor and outdoor connections of gas appliances to gas piping system. May be used with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures.\u003c\/p\u003e\n\u003cp\u003eBrassCraft’s ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.\u003cbr\u003e*Gas connectors may not be permitted for all uses in all locations. Consult with a professional installation expert or a plumber to ensure compliance with all applicable codes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCorrugated stainless steel with corrosion resistant coating\u003c\/li\u003e\n\u003cli\u003eIncludes: 1\/2\" MIP (tapped 3\/8\" FIP) steel fitting and 1\/2\" FIP inlet brass gas ball valve\u003c\/li\u003e\n\u003cli\u003eIdeal for moderate demand appliances such as 4-burner gas ranges, cook-tops, dryers and water heaters\u003c\/li\u003e\n\u003cli\u003eUse with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures\u003c\/li\u003e\n\u003cli\u003eYellow coating\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating: -40°F to 150°F\u003c\/li\u003e\n\u003cli\u003ePressure rating: 1\/2 psi maximum\u003c\/li\u003e\n\u003cli\u003eDesigned, machined and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Video: How to Install a BrassCraft Gas Appliance Connector\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Er_G9YXsT4c\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003csup\u003e\u003cspan style=\"color: #999999;\"\u003ePXZ1040310 PXZ1040320 PXZ1040330 PXZ1040340 PXZ1040350 PXZ1040360\u003c\/span\u003e\u003c\/sup\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"18 Inches","offer_id":44445942841589,"sku":"CSSD4K-18","price":26.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/cssd4k_3f6d33cc-629d-4399-8074-d3d716698758.jpg?v=1755626477"},{"product_id":"1-2-mip-x-1-2-fip-ball-valve-procoat-stainless-steel-gas-connector-2","title":"CSSD4K-24 - ProCoat Stainless Steel Gas Connector with Ball Valve - 1\/2\" MIP x FIP (3\/8\" FIP Tap), 3\/8\" ID, 24\"","description":"\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=22224651-15c5-4916-a341-ac402e84fc16\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eSubmittal Form\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=3799727e-68d1-4896-8cfc-caa117098cef\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCSSD4K - 1\/2” MIP x 1\/2” FIP Ball Valve ProCoat Stainless Steel Gas Connector\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor use with indoor and outdoor connections of gas appliances to gas piping system. May be used with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures.\u003c\/p\u003e\n\u003cp\u003eBrassCraft’s ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.\u003cbr\u003e*Gas connectors may not be permitted for all uses in all locations. Consult with a professional installation expert or a plumber to ensure compliance with all applicable codes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCorrugated stainless steel with corrosion resistant coating\u003c\/li\u003e\n\u003cli\u003eIncludes: 1\/2\" MIP (tapped 3\/8\" FIP) steel fitting and 1\/2\" FIP inlet brass gas ball valve\u003c\/li\u003e\n\u003cli\u003eIdeal for moderate demand appliances such as 4-burner gas ranges, cook-tops, dryers and water heaters\u003c\/li\u003e\n\u003cli\u003eUse with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures\u003c\/li\u003e\n\u003cli\u003eYellow coating\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating: -40°F to 150°F\u003c\/li\u003e\n\u003cli\u003ePressure rating: 1\/2 psi maximum\u003c\/li\u003e\n\u003cli\u003eDesigned, machined and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Video: How to Install a BrassCraft Gas Appliance Connector\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Er_G9YXsT4c\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003csup\u003e\u003cspan style=\"color: #999999;\"\u003ePXZ1040310 PXZ1040320 PXZ1040330 PXZ1040340 PXZ1040350 PXZ1040360\u003c\/span\u003e\u003c\/sup\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"24 Inches","offer_id":44445943038197,"sku":"CSSD4K-24","price":25.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/cssd4k_3da49be6-41d6-44d7-91f9-2cd36312ddb3.jpg?v=1755626476"},{"product_id":"1-2-mip-x-1-2-fip-ball-valve-procoat-stainless-steel-gas-connector-3","title":"CSSD4K-30 - ProCoat Stainless Steel Gas Connector with Ball Valve - 1\/2\" MIP x FIP (3\/8\" FIP Tap), 3\/8\" ID, 30\"","description":"\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=22224651-15c5-4916-a341-ac402e84fc16\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eSubmittal Form\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=3799727e-68d1-4896-8cfc-caa117098cef\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCSSD4K - 1\/2” MIP x 1\/2” FIP Ball Valve ProCoat Stainless Steel Gas Connector\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor use with indoor and outdoor connections of gas appliances to gas piping system. May be used with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures.\u003c\/p\u003e\n\u003cp\u003eBrassCraft’s ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.\u003cbr\u003e*Gas connectors may not be permitted for all uses in all locations. Consult with a professional installation expert or a plumber to ensure compliance with all applicable codes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCorrugated stainless steel with corrosion resistant coating\u003c\/li\u003e\n\u003cli\u003eIncludes: 1\/2\" MIP (tapped 3\/8\" FIP) steel fitting and 1\/2\" FIP inlet brass gas ball valve\u003c\/li\u003e\n\u003cli\u003eIdeal for moderate demand appliances such as 4-burner gas ranges, cook-tops, dryers and water heaters\u003c\/li\u003e\n\u003cli\u003eUse with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures\u003c\/li\u003e\n\u003cli\u003eYellow coating\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating: -40°F to 150°F\u003c\/li\u003e\n\u003cli\u003ePressure rating: 1\/2 psi maximum\u003c\/li\u003e\n\u003cli\u003eDesigned, machined and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Video: How to Install a BrassCraft Gas Appliance Connector\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Er_G9YXsT4c\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003csup\u003e\u003cspan style=\"color: #999999;\"\u003ePXZ1040310 PXZ1040320 PXZ1040330 PXZ1040340 PXZ1040350 PXZ1040360\u003c\/span\u003e\u003c\/sup\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"30 Inches","offer_id":44445943070965,"sku":"CSSD4K-30","price":29.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/cssd4k_8dc9424d-8dc5-4f4b-b89e-58be40bdd139.jpg?v=1755626475"},{"product_id":"1-2-mip-x-1-2-fip-ball-valve-procoat-stainless-steel-gas-connector-4","title":"CSSD4K-36 - ProCoat Stainless Steel Gas Connector with Ball Valve - 1\/2\" MIP x FIP (3\/8\" FIP Tap), 3\/8\" ID, 36\"","description":"\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=22224651-15c5-4916-a341-ac402e84fc16\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eSubmittal Form\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=3799727e-68d1-4896-8cfc-caa117098cef\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCSSD4K - 1\/2” MIP x 1\/2” FIP Ball Valve ProCoat Stainless Steel Gas Connector\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor use with indoor and outdoor connections of gas appliances to gas piping system. May be used with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures.\u003c\/p\u003e\n\u003cp\u003eBrassCraft’s ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.\u003cbr\u003e*Gas connectors may not be permitted for all uses in all locations. Consult with a professional installation expert or a plumber to ensure compliance with all applicable codes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCorrugated stainless steel with corrosion resistant coating\u003c\/li\u003e\n\u003cli\u003eIncludes: 1\/2\" MIP (tapped 3\/8\" FIP) steel fitting and 1\/2\" FIP inlet brass gas ball valve\u003c\/li\u003e\n\u003cli\u003eIdeal for moderate demand appliances such as 4-burner gas ranges, cook-tops, dryers and water heaters\u003c\/li\u003e\n\u003cli\u003eUse with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures\u003c\/li\u003e\n\u003cli\u003eYellow coating\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating: -40°F to 150°F\u003c\/li\u003e\n\u003cli\u003ePressure rating: 1\/2 psi maximum\u003c\/li\u003e\n\u003cli\u003eDesigned, machined and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Video: How to Install a BrassCraft Gas Appliance Connector\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Er_G9YXsT4c\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003csup\u003e\u003cspan style=\"color: #999999;\"\u003ePXZ1040310 PXZ1040320 PXZ1040330 PXZ1040340 PXZ1040350 PXZ1040360\u003c\/span\u003e\u003c\/sup\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"36 Inches","offer_id":44445943693557,"sku":"CSSD4K-36","price":34.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/cssd4k_57130188-f4aa-432c-a8ab-318577e7034c.jpg?v=1755626474"},{"product_id":"1-2-mip-x-1-2-fip-ball-valve-procoat-stainless-steel-gas-connector-5","title":"CSSD4K-48 - ProCoat Stainless Steel Gas Connector with Ball Valve - 1\/2\" MIP x FIP (3\/8\" FIP Tap), 3\/8\" ID, 48\"","description":"\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=22224651-15c5-4916-a341-ac402e84fc16\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eSubmittal Form\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=3799727e-68d1-4896-8cfc-caa117098cef\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCSSD4K - 1\/2” MIP x 1\/2” FIP Ball Valve ProCoat Stainless Steel Gas Connector\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor use with indoor and outdoor connections of gas appliances to gas piping system. May be used with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures.\u003c\/p\u003e\n\u003cp\u003eBrassCraft’s ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly onto the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested, prior to nut and fitting assembly. This process results in the most complete corrosion resistance available.\u003cbr\u003e*Gas connectors may not be permitted for all uses in all locations. Consult with a professional installation expert or a plumber to ensure compliance with all applicable codes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCorrugated stainless steel with corrosion resistant coating\u003c\/li\u003e\n\u003cli\u003eIncludes: 1\/2\" MIP (tapped 3\/8\" FIP) steel fitting and 1\/2\" FIP inlet brass gas ball valve\u003c\/li\u003e\n\u003cli\u003eIdeal for moderate demand appliances such as 4-burner gas ranges, cook-tops, dryers and water heaters\u003c\/li\u003e\n\u003cli\u003eUse with natural, manufactured, mixed and liquefied petroleum (LP or propane) gases and LP gas-air mixtures\u003c\/li\u003e\n\u003cli\u003eYellow coating\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating: -40°F to 150°F\u003c\/li\u003e\n\u003cli\u003ePressure rating: 1\/2 psi maximum\u003c\/li\u003e\n\u003cli\u003eDesigned, machined and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Video: How to Install a BrassCraft Gas Appliance Connector\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/Er_G9YXsT4c\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003csup\u003e\u003cspan style=\"color: #999999;\"\u003ePXZ1040310 PXZ1040320 PXZ1040330 PXZ1040340 PXZ1040350 PXZ1040360\u003c\/span\u003e\u003c\/sup\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"48 Inches","offer_id":44445943857397,"sku":"CSSD4K-48","price":28.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/cssd4k_a457d269-ccd7-4784-becc-edd2cb73586d.jpg?v=1755626473"},{"product_id":"3-4-fip-x-3-4-fip-flexible-water-heater-connector","title":"WB00-12N - Flexible Water Heater Connector - 3\/4\" FIP x FIP, 3\/4\" ID, 12\"","description":"\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=c82a7451-52a1-4c72-9646-9d86e2a5b714\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eSubmittal Form\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWB00 - Flexible Water Heater Connector - 3\/4\" FIP x 3\/4\" FIP \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBrassCraft Copper-Flex 3\/4\" Female Iron Pipe inlet x 3\/4\" Female Iron Pipe outlet water heater connectors. Used to connect the water supply to your water heater, this connector features an integrated dielectric sleeve, the sleeve isolates dissimilar metals within the waterway, where galvanic and electrolytic corrosion have their greatest potential. This separation provides complete protection against galvanic corrosion that can deteriorate the connector and cause leaks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCorrugated copper tube\u003c\/li\u003e\n\u003cli\u003e3\/4\" FIP x 3\/4\" FIP\u003c\/li\u003e\n\u003cli\u003eUse with electric or gas water heaters or softeners. Use only to connect water\u003c\/li\u003e\n\u003cli\u003eFor use in exposed locations only to connect water heaters and other water connected devices to the water supply;\u003c\/li\u003e\n\u003cli\u003eNo dielectric union needed, the integrated dielectric sleeve eliminates the need to install an additional dielectric union, reducing time and installation costs\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating: 40 to 140 degrees F, intermittent to 180 degrees F\u003c\/li\u003e\n\u003cli\u003ePressure Rating: water pressures up to 125 PSI maximum\u003c\/li\u003e\n\u003cli\u003eDesigned, Machined and Assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Video: How to Install a BrassCraft FIP x FIP Water Heater Connector\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/dm2p6GHKNFs\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003csup\u003e\u003cspan style=\"color: #999999;\"\u003ePXZ1143605 PXZ1143625 PXZ1143640 PXZ1143655\u003c\/span\u003e\u003c\/sup\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"12 Inches","offer_id":44445966500085,"sku":"WB00-12N","price":12.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/wb00-12n_std.jpg?v=1755626471"},{"product_id":"3-4-fip-x-3-4-fip-flexible-water-heater-connector-2","title":"WB00-18N - Flexible Water Heater Connector - 3\/4\" FIP x FIP, 3\/4\" ID, 18\"","description":"\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=c82a7451-52a1-4c72-9646-9d86e2a5b714\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eSubmittal Form\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWB00 - Flexible Water Heater Connector - 3\/4\" FIP x 3\/4\" FIP \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBrassCraft Copper-Flex 3\/4\" Female Iron Pipe inlet x 3\/4\" Female Iron Pipe outlet water heater connectors. Used to connect the water supply to your water heater, this connector features an integrated dielectric sleeve, the sleeve isolates dissimilar metals within the waterway, where galvanic and electrolytic corrosion have their greatest potential. This separation provides complete protection against galvanic corrosion that can deteriorate the connector and cause leaks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCorrugated copper tube\u003c\/li\u003e\n\u003cli\u003e3\/4\" FIP x 3\/4\" FIP\u003c\/li\u003e\n\u003cli\u003eUse with electric or gas water heaters or softeners. Use only to connect water\u003c\/li\u003e\n\u003cli\u003eFor use in exposed locations only to connect water heaters and other water connected devices to the water supply;\u003c\/li\u003e\n\u003cli\u003eNo dielectric union needed, the integrated dielectric sleeve eliminates the need to install an additional dielectric union, reducing time and installation costs\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating: 40 to 140 degrees F, intermittent to 180 degrees F\u003c\/li\u003e\n\u003cli\u003ePressure Rating: water pressures up to 125 PSI maximum\u003c\/li\u003e\n\u003cli\u003eDesigned, Machined and Assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Video: How to Install a BrassCraft FIP x FIP Water Heater Connector\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/dm2p6GHKNFs\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003csup\u003e\u003cspan style=\"color: #999999;\"\u003ePXZ1143605 PXZ1143625 PXZ1143640 PXZ1143655\u003c\/span\u003e\u003c\/sup\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"18 Inches","offer_id":44445967679733,"sku":"WB00-18N","price":14.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/wb00-12n_std_bf08a3b8-c93e-4a1b-a445-bdb6c6e5867d.jpg?v=1755626469"},{"product_id":"3-4-fip-x-3-4-fip-flexible-water-heater-connector-3","title":"WB00-24N - Flexible Water Heater Connector - 3\/4\" FIP x FIP, 3\/4\" ID, 24\"","description":"\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=c82a7451-52a1-4c72-9646-9d86e2a5b714\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eSubmittal Form\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWB00 - Flexible Water Heater Connector - 3\/4\" FIP x 3\/4\" FIP \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBrassCraft Copper-Flex 3\/4\" Female Iron Pipe inlet x 3\/4\" Female Iron Pipe outlet water heater connectors. Used to connect the water supply to your water heater, this connector features an integrated dielectric sleeve, the sleeve isolates dissimilar metals within the waterway, where galvanic and electrolytic corrosion have their greatest potential. This separation provides complete protection against galvanic corrosion that can deteriorate the connector and cause leaks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCorrugated copper tube\u003c\/li\u003e\n\u003cli\u003e3\/4\" FIP x 3\/4\" FIP\u003c\/li\u003e\n\u003cli\u003eUse with electric or gas water heaters or softeners. Use only to connect water\u003c\/li\u003e\n\u003cli\u003eFor use in exposed locations only to connect water heaters and other water connected devices to the water supply;\u003c\/li\u003e\n\u003cli\u003eNo dielectric union needed, the integrated dielectric sleeve eliminates the need to install an additional dielectric union, reducing time and installation costs\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating: 40 to 140 degrees F, intermittent to 180 degrees F\u003c\/li\u003e\n\u003cli\u003ePressure Rating: water pressures up to 125 PSI maximum\u003c\/li\u003e\n\u003cli\u003eDesigned, Machined and Assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Video: How to Install a BrassCraft FIP x FIP Water Heater Connector\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/dm2p6GHKNFs\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003csup\u003e\u003cspan style=\"color: #999999;\"\u003ePXZ1143605 PXZ1143625 PXZ1143640 PXZ1143655\u003c\/span\u003e\u003c\/sup\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"24 Inches","offer_id":44445968302325,"sku":"WB00-24N","price":17.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/311075_brawb0024n.jpg?v=1762385107"},{"product_id":"cr1900dvx-c-1-2-nom-comp-x-3-8-o-d-comp-x-1-4-o-d-comp","title":"CR1900DVX C -  1\/2\" Nom Comp x 3\/8\" O.D. Comp x 1\/4\" O.D. Comp","description":"\u003cp data-uw-styling-context=\"true\"\u003eBrassCraft 1\/2 in. Nom Compression Inlet x 3\/8 in. OD Compression x 1\/4 in. OD Compression Dual Outlet, Dual Shut-Off Multi-Turn Angle Valve controls water flow to household plumbing fixtures. The angle valve is most often used where the water pipe enters the room from the wall. The dual outlet allows two independent supply lines to be attached to a single valve. The dual shut-off allows you to turn off the water to one source while working on another. Ideal for adding dishwashers, ice makers, water filters and instant hot water dispensers to existing water supply. With a few turns of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.\u003c\/p\u003e\n\u003cul class=\"single-products-page__list\"\u003e\n\u003cli data-uw-styling-context=\"true\"\u003eForged brass body provides strength, durability and long-lasting performance\u003c\/li\u003e\n\u003cli data-uw-styling-context=\"true\"\u003e1\/2 in. Nom Comp Inlet x 3\/8 in. OD Comp x 1\/4 in. OD Comp\u003c\/li\u003e\n\u003cli data-uw-styling-context=\"true\"\u003eCompatible with PEX piping\u003c\/li\u003e\n\u003cli data-uw-styling-context=\"true\"\u003eFor use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115° F. For those applications, use our KT™ series ball stops.\u003c\/li\u003e\n\u003cli data-uw-styling-context=\"true\"\u003eMulti-turn operation means water flow control with only a few turns of the handle\u003c\/li\u003e\n\u003cli data-uw-styling-context=\"true\"\u003eEasy-to-remove handle protects against accidental operation during rough-ins\u003c\/li\u003e\n\u003cli data-uw-styling-context=\"true\"\u003eForged body provides strength,durability,and long-lasting performance\u003c\/li\u003e\n\u003cli data-uw-styling-context=\"true\"\u003eBrass finish\u003c\/li\u003e\n\u003cli data-uw-styling-context=\"true\"\u003eFor indoor use\u003c\/li\u003e\n\u003cli data-uw-styling-context=\"true\"\u003eTemperature rating: 40° to 160°F\u003c\/li\u003e\n\u003cli data-uw-styling-context=\"true\"\u003ePressure rating: 125 psi maximum\u003c\/li\u003e\n\u003cli data-uw-styling-context=\"true\"\u003eDesigned, machined and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Video\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/_0UW5QHRg34\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cspan style=\"color: #999999;\"\u003ePTZCA10006\u003c\/span\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":44548033347829,"sku":"CR1900DVX-C","price":53.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/brasscraft_cr1900dvxc_std.png?v=1755626194"},{"product_id":"cr1900rx-r1-1-2-nom-comp-x-3-8-o-d-comp-x-1-4-o-d-comp","title":"CR1900RX R1 - 1\/2\" Nom Comp x 3\/8\" O.D. Comp x 1\/4\" O.D. Comp","description":"\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=b15b668b-ba86-475d-a9a8-567be3b5c9eb\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eWater Stops Installation Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=10468f13-94b9-41b2-a0f7-6b042d148d8b\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eWater Stops Parts Diagram\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eBrassCraft 1\/2 in. Nom Compression Inlet x 3\/8 in. OD Compression x 1\/4 in. OD Compression (right side) Dual Outlet Multi-Turn Valve controls water flow to household plumbing fixtures. The dual outlet allows two independent supply lines to be attached to a single valve. Ideal for adding dishwashers, ice makers, water filters and instant hot water dispensers to existing water supply. With a few turns of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachined one-piece brass body provides strength, durability and long-lasting performance\u003c\/li\u003e\n\u003cli\u003e1\/2 in. Nom Comp Inlet x 3\/8 in. OD Comp x 1\/4 in. OD Comp\u003c\/li\u003e\n\u003cli\u003eCompatible with copper pipe\u003c\/li\u003e\n\u003cli\u003eFor use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115° F. For those applications, use our KT™ series ball stops.\u003c\/li\u003e\n\u003cli\u003eMulti-turn operation means water flow control with only a few turns of the handle\u003c\/li\u003e\n\u003cli\u003eEasy-to-remove handle protects against accidental operation during rough-ins\u003c\/li\u003e\n\u003cli\u003eIdeal for adding dishwashers, ice makers, water filters and instant hot water dispensers to existing water supply\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating: 40° to 160°F\u003c\/li\u003e\n\u003cli\u003ePressure rating: 125 psi maximum\u003c\/li\u003e\n\u003cli\u003eDesigned, machined and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cspan style=\"color: #999999;\"\u003ePTZCA10007\u003c\/span\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":44548033511669,"sku":"CR1900RX R1","price":29.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/cr1900rxr1_std.jpg?v=1755626193"},{"product_id":"cr1901dvsx-r-1-2-nom-comp-x-3-8-o-d-comp-x-3-8-o-d-comp","title":"CR1901DVSX R - 1\/2\" Nom Comp x 3\/8\" O.D. Comp x 3\/8\" O.D. Comp","description":"\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=e27c05eb-1e07-426b-b31d-22c429571ddc\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eInstallation Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=ff631a8d-5e56-49f7-8bd6-9fcf40ab5d0e\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eBrassCraft Water Supplies Catalog\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=8e1cb2de-e0d0-4885-8865-6e4eaedf59a0\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eCR1900\/1901DVS Submittal Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eBrassCraft 1\/2 in. Nom Compression Inlet x 3\/8 in. OD Compression x 3\/8 in. OD Compression Dual Outlet, Dual Shut-Off Multi-Turn Straight Valve controls water flow to household plumbing fixtures. The straight valve is most often used where the water pipe enters the room from the floor. The dual outlet allows two independent supply lines to be attached to a single valve. The dual shut-off allows you to turn off the water to one source while working on another. Ideal for adding dishwashers, ice makers, water filters and instant hot water dispensers to existing water supply. With a few turns of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.\u003c\/p\u003e\n\u003cul class=\"single-products-page__list\"\u003e\n\u003cli\u003eForged one-piece brass body provides strength, durability,and long-lasting performance\u003c\/li\u003e\n\u003cli\u003e1\/2 in. Nom Comp Inlet x 3\/8 in. OD Comp x 3\/8 in. OD Comp\u003c\/li\u003e\n\u003cli\u003eCompatible with copper pipe\u003c\/li\u003e\n\u003cli\u003eFor use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115° F. For those applications, use our KT™ series ball stops.\u003c\/li\u003e\n\u003cli\u003eMulti-turn operation means water flow control with only a few turns of the handle\u003c\/li\u003e\n\u003cli\u003eEasy-to-remove handle protects against accidental operation during rough-ins\u003c\/li\u003e\n\u003cli\u003eBrass finish\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating: 40° to 160°F\u003c\/li\u003e\n\u003cli\u003ePressure rating: 125 psi maximum\u003c\/li\u003e\n\u003cli\u003eNo-lead certified\u003c\/li\u003e\n\u003cli\u003eDesigned, machined and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/kNaVBHn1vGo\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cspan style=\"color: #999999;\"\u003ePTZCA10008\u003c\/span\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":44548033675509,"sku":"CR1901DVSX R","price":46.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/brasscraft_cr1901dvsx-r_3.jpg?v=1755626192"},{"product_id":"cr1901lrx-r-1-2-nom-comp-x-3-8-o-d-comp-x-3-8-o-d-comp","title":"CR1901LRX R -   1\/2\" Nom Comp x 3\/8\" O.D. Comp x 3\/8\" O.D. Comp","description":"\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=b15b668b-ba86-475d-a9a8-567be3b5c9eb\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eWater Stops Installation Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=10468f13-94b9-41b2-a0f7-6b042d148d8b\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eWater Stops Parts Diagram\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eBrassCraft 1\/2 in. Nom Compression Inlet x 3\/8 in. OD Compression x 3\/8 in. OD Compression Dual Outlet Multi-Turn Valve controls water flow to household plumbing fixtures. The dual outlet allows two independent supply lines to be attached to a single valve. Ideal for adding dishwashers, ice makers, water filters and instant hot water dispensers to existing water supply. With a few turns of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachined one-piece brass body provides strength, durability and long-lasting performance\u003c\/li\u003e\n\u003cli\u003e1\/2 in. Nom Comp Inlet x 3\/8 in. OD Comp x 3\/8 in. OD Comp\u003c\/li\u003e\n\u003cli\u003eCompatible with copper pipe\u003c\/li\u003e\n\u003cli\u003eFor use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115° F. For those applications, use our KT™ series ball stops.\u003c\/li\u003e\n\u003cli\u003eMulti-turn operation means water flow control with only a few turns of the handle\u003c\/li\u003e\n\u003cli\u003eEasy-to-remove handle protects against accidental operation during rough-ins\u003c\/li\u003e\n\u003cli\u003eMachined one-piece brass body provides strength, durability and long-lasting performance\u003c\/li\u003e\n\u003cli\u003eBrass finish\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating: 40° to 160°F\u003c\/li\u003e\n\u003cli\u003ePressure rating: 125 psi maximum\u003c\/li\u003e\n\u003cli\u003eDesigned, machined and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Video\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/_0UW5QHRg34\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cspan style=\"color: #999999;\"\u003ePTZCA10010\u003c\/span\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":44548034167029,"sku":"CR1901LRX R","price":28.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/cr1901lrxr1_std.jpg?v=1755626191"},{"product_id":"ktcr14x-c-1-4-turn-straight-stop-1-2-nom-comp-x-3-8-o-d-comp","title":"KTCR14X C - 1\/4 Turn Straight Stop,  1\/2\" Nom Comp x 3\/8\" O.D. Comp","description":"\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=b15b668b-ba86-475d-a9a8-567be3b5c9eb\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eWater Stops Installation Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=b598d5f4-b330-4856-b988-8cec52ed2180\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eProduct Submittal Form\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=10468f13-94b9-41b2-a0f7-6b042d148d8b\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eWater Stops Parts Diagram\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eBrassCraft 1\/2 in. Nom Comp Inlet x 3\/8 in. OD Comp Outlet 1\/4-Turn Straight Ball Stop controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a 90 degree turn of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without turning off water to the entire home.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachined one-piece brass body provides strength, durability and long-lasting performance\u003c\/li\u003e\n\u003cli\u003e1\/2 in. Nom Comp Inlet x 3\/8 in. OD Comp Outlet\u003c\/li\u003e\n\u003cli\u003eCompatible with copper pipe\u003c\/li\u003e\n\u003cli\u003eFor use in potable water distribution systems and recirculating water systems that produce continuous use temperatures above 115° F\u003c\/li\u003e\n\u003cli\u003ePrecision-machined brass ball to provide smoother operation without freeze ups even after long periods of non-use\u003c\/li\u003e\n\u003cli\u003eEasy-to-remove handle protects against accidental operation during rough-ins\u003c\/li\u003e\n\u003cli\u003ePlated stem provides corrosion resistance and prevents o-ring damage. Metal handle is designed for durability, corrosion resistance \u0026amp; a sleek appearance\u003c\/li\u003e\n\u003cli\u003eChrome and Brass finish\u003c\/li\u003e\n\u003cli\u003e100% leak tested to ensure reliable, leak-free performance\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating: 40° to 180°F\u003c\/li\u003e\n\u003cli\u003ePressure rating: 125 psi maximum\u003c\/li\u003e\n\u003cli\u003eDesigned, machined and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Video\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/_0UW5QHRg34\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cspan style=\"color: #999999;\"\u003ePTZCA10029\u003c\/span\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":44548034330869,"sku":"KTCR14X C","price":14.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/ktcr14xc1_std.jpg?v=1755626191"},{"product_id":"ocr09x-c-1-2-nom-comp-x-1-4-o-d-comp","title":"OCR09X C - 1\/2\" Nom Comp x 1\/4\" O.D. Comp","description":"\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=26e4e0fb-3178-4898-9c84-4d81fc2667ea\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eWater Stops Installation Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp data-uw-styling-context=\"true\"\u003e\u003cstrong\u003eBrassCraft OCR09X C - 1\/2\" Nom Comp x 1\/4\" O.D. Comp\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-uw-styling-context=\"true\"\u003eBrassCraft 1\/2 in. Nominal Compression Inlet x 1\/4 in. OD Compression Outlet Multi-Turn Angle Valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a few turns of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without turning off water to the entire home.\u003c\/p\u003e\n\u003cul class=\"single-products-page__list\"\u003e\n\u003cli data-uw-styling-context=\"true\"\u003eMachined, 1-piece body construction for strength, durability and long-lasting performance\u003c\/li\u003e\n\u003cli data-uw-styling-context=\"true\"\u003e1\/2 in. Nom Comp x 1\/4 in. OD Comp\u003c\/li\u003e\n\u003cli data-uw-styling-context=\"true\"\u003eCompatible with copper or PEX (PEX installations require a stainless steel tube insert)\u003c\/li\u003e\n\u003cli data-uw-styling-context=\"true\"\u003eFor use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115° F. For those applications, use our KT™ series ball stops.\u003c\/li\u003e\n\u003cli data-uw-styling-context=\"true\"\u003eMulti-turn operation means water flow control with only a few turns of the handle\u003c\/li\u003e\n\u003cli data-uw-styling-context=\"true\"\u003eEasy-to-remove handle protects against accidental operation during rough-ins\u003c\/li\u003e\n\u003cli data-uw-styling-context=\"true\"\u003eOne-piece shut-off mechanism provides smooth on-off operation\u003c\/li\u003e\n\u003cli data-uw-styling-context=\"true\"\u003eChrome and Brass finish\u003c\/li\u003e\n\u003cli data-uw-styling-context=\"true\"\u003eFor indoor use\u003c\/li\u003e\n\u003cli data-uw-styling-context=\"true\"\u003eTemperature rating: 40° to 160°F\u003c\/li\u003e\n\u003cli data-uw-styling-context=\"true\"\u003ePressure rating: 125 psi maximum\u003c\/li\u003e\n\u003cli data-uw-styling-context=\"true\"\u003eDesigned, machined and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cspan style=\"color: #999999;\"\u003ePTZCA10003\u003c\/span\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":44548034691317,"sku":"OCR09X-C","price":22.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/brasscraft_ocr09xc_1.png?v=1755626190"},{"product_id":"ocr14x-c-1-2-nom-comp-x-3-8-o-d-comp-multi-turn-supply-stop","title":"OCR14X C -  1\/2\" Nom Comp x 3\/8\" O.D. Comp Multi Turn Supply Stop","description":"\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=b15b668b-ba86-475d-a9a8-567be3b5c9eb\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eWater Stops Installation Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=a47b729b-d8db-446d-addd-8cac56533ebc\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eProduct Submittal Form\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=10468f13-94b9-41b2-a0f7-6b042d148d8b\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eWater Stops Parts Diagram\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eBrassCraft 1\/2 in. Nominal Compression Inlet x 3\/8 in. OD Compression Outlet Multi-Turn Straight Valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a few turns of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without turning off water to the entire home.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachined, 1-piece brass body construction for strength, durability and long-lasting performance\u003c\/li\u003e\n\u003cli\u003e1\/2 in. Nom Comp x 3\/8 in. OD Comp\u003c\/li\u003e\n\u003cli\u003eCompatible with copper piping\u003c\/li\u003e\n\u003cli\u003eFor use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115° F. For those applications, use our KT™ series ball stops.\u003c\/li\u003e\n\u003cli\u003eMulti-turn operation means water flow control with only a few turns of the handle\u003c\/li\u003e\n\u003cli\u003eEasy-to-remove handle protects against accidental operation during rough-ins\u003c\/li\u003e\n\u003cli\u003eOne-piece shut-off mechanism provides smooth on-off operation\u003c\/li\u003e\n\u003cli\u003eChrome and Brass finish\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating: 40° to 160°F\u003c\/li\u003e\n\u003cli\u003ePressure rating: 125 psi maximum\u003c\/li\u003e\n\u003cli\u003eIAPMO and CSA listed to ASME A112.18.1\/CSA B125.1\u003c\/li\u003e\n\u003cli\u003eDesigned, machined and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Video\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/_0UW5QHRg34\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cspan style=\"color: #999999;\"\u003ePTZCA10013\u003c\/span\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":44548035051765,"sku":"OCR14X C","price":10.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/ocr14xc_std.jpg?v=1755626189"},{"product_id":"ocr19b12dlx-c-toilet-kit-1-2-nom-comp-x-3-8-o-d-comp-multi-turn-angle-valve-with-12","title":"OCR19B12DLX C - Toilet Kit  1\/2\" Nom Comp x 3\/8\" O.D. Comp Multi-Turn Angle Valve with 12","description":"\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=b15b668b-ba86-475d-a9a8-567be3b5c9eb\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eWater Stops Installation Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=10468f13-94b9-41b2-a0f7-6b042d148d8b\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eWater Stops Parts Diagram\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eBrassCraft Toilet Supply Kit includes everything you need to connect your water supply to your toilet. Components include: (1) 1\/2 in. Nominal Compression inlet x 3\/8 in. O.D. Compression outlet multi-turn angle valve, (1) Speedi Plumb® PLUS 3\/8 in. O.D. Compression inlet x 7\/8 in. Ballcock outlet braided water connector and (1) shallow flange. The water shut-off valve has an angle body which is most often used to connect to a water pipe that enters the room from the wall. Multi-turn operation means water flow control with only a few turns of the handle. Allows you to maintain, repair or replace your fixture without shutting off the water to the entire home. The flexible braided polymer connector features a high tenacity, multi-filament yarn, protected by a special polymer coating for optimum corrosion resistance and durability. The braided polymer fibers are also designed to bend freely without kinking or crimping. This connector features BrassCraft’s tough PVC inner hose to resist attack by chlorine, chloramines and other corrosive elements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBraided polymer tube; brass valve; stainless steel flange\u003c\/li\u003e\n\u003cli\u003e1\/2 in. Nominal Compression x 3\/8 in. O.D. Compression\u003c\/li\u003e\n\u003cli\u003eValve compatible with copper and PEX pipe (PEX installs require a stainless steel tube insert)\u003c\/li\u003e\n\u003cli\u003eFor use in potable water distribution systems in accessible locations only\u003c\/li\u003e\n\u003cli\u003eMulti-turn operation means water flow control with only a few turns of the handle\u003c\/li\u003e\n\u003cli\u003eSpeedi Plumb® PLUS braided connector bends freely without kinking or crimping, installation is easier, especially in cramped quarters\u003c\/li\u003e\n\u003cli\u003eExternal corrosion resistance to most common household, tile and glass cleaners\u003c\/li\u003e\n\u003cli\u003eEasy-to-remove handle protects against accidental operation during rough-ins\u003c\/li\u003e\n\u003cli\u003eKit includes: (1) 1\/2 in. Nominal Compression inlet x 3\/8 in. O.D. Compression outlet multi-turn angle valve, (1) Speedi Plumb® PLUS 3\/8 in. O.D. Compression inlet x 7\/8 in. Ballcock (metal nut) outlet braided water connector and (1) shallow flange.\u003c\/li\u003e\n\u003cli\u003eTough PVC inner hose resists attack by chlorine, chloramines and other corrosive elements\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating: 40° to 160° F, intermittent to 180° F\u003c\/li\u003e\n\u003cli\u003ePressure rating: 125 PSI maximum\u003c\/li\u003e\n\u003cli\u003eNo-lead certified\u003c\/li\u003e\n\u003cli\u003eIAPMO listed to ASME A112.18.1\u003c\/li\u003e\n\u003cli\u003eDesigned, machined and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Video\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/_0UW5QHRg34\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cspan style=\"color: #999999;\"\u003ePTZCA10043\u003c\/span\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":44548035248373,"sku":"OCR19B12DLX C","price":14.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/ocr19b12dlxc_inl.jpg?v=1755626188"},{"product_id":"ocr19x-c-1-2-nom-comp-x-3-8-o-d-comp-chrome-plated","title":"OCR19X C - 1\/2\" Nom Comp x 3\/8\" O.D. Comp, Chrome Plated","description":"\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=b15b668b-ba86-475d-a9a8-567be3b5c9eb\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eWater Stops Installation Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=10468f13-94b9-41b2-a0f7-6b042d148d8b\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eWater Stops Parts Diagram\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eBrassCraft 1\/2 in. Nominal Compression Inlet x 3\/8 in. OD Compression Outlet Multi-Turn Angle Valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The angle valve is most often used where the water pipe enters the room from the wall. With a few turns of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without turning off water to the entire home.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachined, 1-piece body construction for strength, durability and long-lasting performance\u003c\/li\u003e\n\u003cli\u003e1\/2 in. Nom Comp Inlet x 3\/8 in. OD Comp Outlet Multi-Turn Angle Stop\u003c\/li\u003e\n\u003cli\u003eCompatible with copper piping\u003c\/li\u003e\n\u003cli\u003eFor use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115° F. For those applications, use our KT™ series ball stops.\u003c\/li\u003e\n\u003cli\u003eMulti-turn operation means water flow control with only a few turns of the handle\u003c\/li\u003e\n\u003cli\u003eEasy-to-remove handle protects against accidental operation during rough-ins\u003c\/li\u003e\n\u003cli\u003eOne-piece shut-off mechanism provides smooth on-off operation\u003c\/li\u003e\n\u003cli\u003eChrome and Brass finish\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating: 40° to 160°F\u003c\/li\u003e\n\u003cli\u003ePressure rating: 125 psi maximum\u003c\/li\u003e\n\u003cli\u003eIAPMO listed to ASME A112.18.1 \/ CSA B125.1\u003c\/li\u003e\n\u003cli\u003eDesigned, machined and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Video\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/_0UW5QHRg34\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cspan style=\"color: #999999;\"\u003ePTZCA10005\u003c\/span\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":44548035510517,"sku":"OCR19X C","price":9.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/ocr19xc_std.jpg?v=1755626187"},{"product_id":"or12x-c-1-2-fip-x-3-8-o-d-compstraight-stop","title":"OR12X C -  1\/2\" FIP x 3\/8\" O.D. CompStraight Stop","description":"\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=b15b668b-ba86-475d-a9a8-567be3b5c9eb\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eWater Stops Installation Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=872ad031-c690-457a-adec-dd961b1bab2c\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eProduct Submittal Form\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=10468f13-94b9-41b2-a0f7-6b042d148d8b\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eWater Stops Parts Diagram\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eBrassCraft 1\/2 in. FIP Inlet x 3\/8 in. OD Compression Outlet Multi-Turn Straight Valve controls water flow to household plumbing fixtures – faucets, toilets, dishwashers, icemakers, washing machines, etc. The straight valve is most often used where the water pipe enters the room from the floor. With a few turns of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without turning off water to the entire home.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachined, 1-piece brass body construction for strength, durability and long-lasting performance\u003c\/li\u003e\n\u003cli\u003e1\/2 in. FIP x 3\/8 in. OD Comp\u003c\/li\u003e\n\u003cli\u003eCompatible with iron pipe\u003c\/li\u003e\n\u003cli\u003eFor use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115° F. For those applications, use our KT™ series ball stops.\u003c\/li\u003e\n\u003cli\u003eMulti-turn operation means water flow control with only a few turns of the handle\u003c\/li\u003e\n\u003cli\u003eEasy-to-remove handle protects against accidental operation during rough-ins\u003c\/li\u003e\n\u003cli\u003eOne-piece shut-off mechanism provides smooth on-off operation\u003c\/li\u003e\n\u003cli\u003eChrome and Brass finish\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating: 40° to 160°F\u003c\/li\u003e\n\u003cli\u003ePressure rating: 125 psi maximum\u003c\/li\u003e\n\u003cli\u003eDesigned, machined and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Video\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/_0UW5QHRg34\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cspan style=\"color: #999999;\"\u003ePTZCA10005\u003c\/span\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":44548035707125,"sku":"OR12X C","price":13.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/or12xc1_std.jpg?v=1755626187"},{"product_id":"r1701lrx-r1-1-2-fip-x-3-8-o-d-comp-x-3-8-o-d-comp","title":"R1701LRX R1 - 1\/2\" FIP x 3\/8\" O.D. Comp x 3\/8\" O.D. Comp","description":"\u003cp\u003e\u003ca href=\"https:\/\/inventory.dearsystems.com\/ProductFamily\/DownloadImage?id=787ed706-d1d3-49d5-80bf-0515a796ca15\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cimg style=\"vertical-align: middle;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/PDF_32_480x480.png?v=1628829076\"\u003eBrassCraft Water Stops Installation Sheet\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eBrassCraft 1\/2 in. FIP Inlet x 3\/8 in. OD Compression x 3\/8 in. OD Compression Dual Outlet Multi-Turn Valve controls water flow to household plumbing fixtures. The dual outlet allows two independent supply lines to be attached to a single valve. Ideal for adding dishwashers, ice makers, water filters and instant hot water dispensers to existing water supply. With a few turns of the valve handle, you are able to stop the flow of water leading to the plumbing fixture, allowing for maintenance and repair without shutting off the water to the entire home.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMachined one-piece brass body provides strength, durability and long-lasting performance\u003c\/li\u003e\n\u003cli\u003e1\/2 in. FIP Inlet x 3\/8 in. OD Comp x 3\/8 in. OD Comp\u003c\/li\u003e\n\u003cli\u003eCompatible with iron pipe\u003c\/li\u003e\n\u003cli\u003eFor use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115° F. For those applications, use our KT series ball stops.\u003c\/li\u003e\n\u003cli\u003eMulti-turn operation means water flow control with only a few turns of the handle\u003c\/li\u003e\n\u003cli\u003eIdeal for adding dishwashers, ice makers, water filters and instant hot water dispensers to existing water supply\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003cli\u003eTemperature rating: 40° to 160°F\u003c\/li\u003e\n\u003cli\u003ePressure rating: 125 psi maximum\u003c\/li\u003e\n\u003cli\u003eDesigned, machined and assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRelated Video\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/_0UW5QHRg34\" width=\"560\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cspan style=\"color: #999999;\"\u003ePTZCA10020\u003c\/span\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":44548036002037,"sku":"R1701LRX R1","price":24.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/brasscraft_r1701lrx-r1.jpg?v=1755626186"},{"product_id":"tbv8-8-straight-gas-ball-valve-1-2-od-flare-x-1-2-fip","title":"TBV8-8 - Straight Gas Ball Valve - 1\/2\" OD Flare x 1\/2\" FIP","description":"\u003cp\u003e\u003cstrong\u003eTBV8-8 - Straight Gas Ball Valve - 1\/2\" OD Flare x 1\/2\" FIP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003chr\u003e\n\u003cp style=\"text-align: right;\"\u003e\u003cspan style=\"color: #999999;\"\u003ePXZ1040365\u003c\/span\u003e\u003c\/p\u003e","brand":"BrassCraft","offers":[{"title":"Default Title","offer_id":44548036329717,"sku":"TBV8-8","price":9.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/files\/brasscraft_tbv8-8.jpg?v=1755626185"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0268\/6150\/2518\/collections\/brands_brasscraft.jpg?v=1672384913","url":"https:\/\/www.supplystop.com\/collections\/brasscraft\/10-15.oembed","provider":"SupplyStop.com","version":"1.0","type":"link"}